1.8m dia at 1.8m length Ukko Cedar barrel sauna
We just finished refurbishing our 1.8m long Cedar barrel sauna. This sauna was used by us in Sydney before moving to Sussex Inlet.
In case you are wondering how we deliver it – simple, we flat pack it on to a made pallet for courier pickup this week:
All of the barrel sauna is inside this cute box 🙂
While we were test fitting this sauna for customer in Torquay, VIC, we decided to show you how to assemble front and back wall of our barrels.
FRONT WALL ASSEMBLY:
Lay all 3 wall parts and connect them together to make a perfect circle
Once all wall parts are together, simply screw them with supplied hex screws.
BACK WALL ASSEMBLY:
It is very similar to front wall except that there’s one more extra detail.
Step 1- Lay barrel sauna back wall partsStep 2 – Connect all parts together. (You can use rubber mallet)Step 3 – Screw all parts together with supplied hex screwsNote: In this image all parts are separate. This is just to show you where the parts need to be screwed together. Make sure that all wall components are tight together (the same as front wall)Step 4 – Attach back wall support panel where marked and screw it down to the back wall
That’s all there’s to it. Any questions, please contact us for more information.
SaveSaveSaveSaveSaveSaveSave
