It’s been long two weeks for us since the start of the Brisbane Home Show. We manufactured 4 person tub with enclosure and steps. We made the smallest so far barrel sauna as above.
Then we’ve spend until 5 o’clock in the morning packing everything up in to our minivan 5 days before the show. We’ve stopped in Grafton on the way to Brisbane to install 6 person hot tub. The list goes on and on…
The great news is that our small round hot rock sauna found its home during the show plus we have few more to make…
We never made barrel saunas at 1.5m length before as we thought it would be too small. Well, it turned out we were wrong – this sauna is in demand!
It is quite big inside to fit 2-3 people and does not take too much space from the backyard.
Plus 3kW heater could be hooked up in to a 15Amp dedicated power plug which makes this sauna a truly portable sauna that one can take when moving houses.
Now the good staff:
Since we have few on order, we decided to extend our Expo offer to anyone in Australia!
For two weeks only, you can have it for only $7,490 plus delivery!
Normal price is $8,990 so you save $1,500 if you order the sauna on or before 21st of March!
It comes with everything required to enjoy the sauna as soon as you put it together and hook it up to your power:
1/2 glass door with roller catch and handles
2 x benches
Cedar air vent
3 x stainless steel rings with rods and couplings
3.0kW sauna heater with genuine Finnish rocks
Floor duck board
Not Ready to Buy Yet?
Pay ONLY $500 deposit
to lock $1,500 discount for the next 3 months!
Last week-end, we’ve delivered and installed 1.8m long Cedar barrel sauna to a small town near Bendigo in Victoria.
This unit is featuring traditional door and a 6kW electric heater. Supplied complete with Cedar bucket, Cedar ladle and thermometer.
… Jason and Jess have just finished… Great job! Thank you very much. – SMSed us Julia, owner of this fine beautiful unit.
If you are after a sauna, you may consider barrel shape as it looks fantastic and something that only few people have here in Australia!
Contact us for pricing and more information.
It was one of these winter days when the sun was shining, the air was warm and we enjoyed our trip to Woongarrah in Central coast. The sauna that we were bringing to install was 2.7m long barrel with overhang and front seat, wood fired heater and LED lights.
Our new design to make it easier to deliver made it possible to put all the parts and long 2.7m staves in our Toyota HiAce without using roof wrecks.
This is how to assemble both back and front walls of your Ukko barrel sauna when supplied flat pack:
Take two halves of the supplied back wall and connect them together:
Now all you have to do is to screw two supporting planks in to the back wall:
This is how back wall looks like fully assembled:
Do the same with the front wall:
Screw all parts together with supplied screws:
Now you are ready to install the sauna starting with the base:
Place bottom staves first and slide back and front walls in to the grooves:
Continue with staves until the barrel is assembled:
Now, just tighten the rings, put benches and a heater and your sauna is ready!
Now all you need is wood and start the burner :):
Few more pictures of the sauna: