TOLL FREE: 1300 767 944

Ukko Saunas & Hot Tubs

Experience Relaxation... Experience Nature... Experience Indulgence... Experience Ukko
You are at: Home » For Wood Fired Saunas » Steel Chimney

Steel chimney for wood fired sauna heaters

 

Chimney pipe with cap

 

About Chimney for Wood Fired Saunas:

Ukko Saunas can supply durable and stylish chimney solution for our M3 and 20 Pro series wood fired sauna heaters.

Ukko steel chimney solution withstands extensive changes in temperature. This product is very durable due to the stainless steel materials used in outer casing and inner pipe.

Standard delivery of the steel chimney includes a 1,5 m steel chimney (Model No.: WHP1500) and chimney accessories box with: 

  • Rain cap
  • Rubber rain flange
  • Installation set for rain flange
  • Stainless steel lead through flange for the ceiling mount
  • Lead-through insulation and protector
  • Non insulated smoke pipe (1m in length)

We can also supply extra 0.5m (WHP500) and 1m (WHP1000) insulated pipe if required.

 

Chimney pipe package for wood fired sauna heaters

All supplementary parts are designed to fit together and the smoke pipes are equipped with slots to lock them together preventing movement caused by temperature changes.

Chimney package can be installed up to a height of 3 meters without support in indoor installations (custom built sauna rooms). For Ukko Sauna kit packages self-supported chimney installation height is normally about 2 m.

The rated maximum temperature of combus­tion gases for a furnace connected to a steel chimney is 600 ºC. The external diameter of the steel chimney is 220 mm and the diameter of the smoke pipe is 115 mm.

The safety distances to inflammable materials are 100 mm. All Ukko Saunas chimney parts have CE-marking, which complies with all international fire- and operational safety requirements. The steel chimney is sootfire proof.

Note: Always read instructions for installation of the steel chimney and the attached furnace thoroughly.

 

General Chimney Installation requirements